Author Topic: Xcruiser XDSR600HD  (Read 2220 times)

0 Members and 1 Guest are viewing this topic.

Offline tarey888

  • Jr. Member
  • **
  • Posts: 11
Xcruiser XDSR600HD
« on: August 10, 2011, 02:38:04 PM »



  • STi 7105 Processor  Speed 450MHz
  • Flash ic 64MB RAM 256MB EEEPROM 256Bytes
  • Linux 2.6.23.17  SH40
  • HDMI Version 1.3
  • Video resolution 480i (NTSC) /576i (PAL) 480p/576p 720p 1080i 1080p
  • 2 Tuners DVB-S2 Equipped by Default and DVB-T as Accessory , easily Changeable to DVB-T DVB-C or DVB-S/S2
  • DiseqC 1.0, 1.1, 1.2, Motor, USALS & Tone A / B
  • Record 3 Channels Simultaneously  and Watch 2 P I P ( Picture in Picture ) HD Supported
  • Powerful Extended EPG supports and Event Recording
  • 3 USB Host ports 2.0 Speed + Internal sata (2.5 Inch HDD) and External E-Sata
  • Software Update or Data Backup By USB or RS-232
  • Supported File System "NTFS" "FAT32" "JFS"
  • Supported Capacity Up-to 1TB (Terra Byte)
  • Connect WiFi Adapter via USB port for Internet or Local Network
  • Ethernet RJ-45 100Mbps
  • Record Channel or play Video MP3 Image file from Local Network Drive, wired or Wireless
  • 2 Scart, RCA Audio L/R, Mono & Stereo, Y / Pb / Pr (Component) HD Output , Optical Audio
  • 2 Smart Card Readers & 2 Common Interface Slots
  • RS-232C 9 pin D-SUB (Male) type, Transfer rate 115Kbps
  • WebZeal Internet Web Browser (Facebook, Yahoomail, Twitter, etc...)
  • YouTube Player, Play in Full Screen all type of video 1080p or 240i, Search video by Typing name or Country vise
  • Dimensions (W x H x D): 340mm x 60mm x 230mm
  • 1W Stand-by Power Consumption
  • Display VFD (Vacuum Fluorescent Display) - 12 Digits
  • 5 Buttons on front Panel (Standby, CH UP/DN, VOL UP/DN)

[/B]

Portable Audio (Dolby Digital)

In order to experience the real cinema experience or feeling to be on the football ground, you need good sound. Therefore, we have equipped receiver with a digital optical output so you can get high quality audio to your receiver / amplifier. Manufactured under license from Dolby Digital to guarantee a good listening experience.



High-resolution Web browser and YouTube features

Xcruiser XDSR600HD is also a high-resolution Web browser and YouTube player. Connect a Keyboard and Mouse and you are ready to surf the web on your TV in HD! With YouTube you can enjoy all the millions of videos available - of course, HD content.


Two Card readers
This model has two built-in card reader. So you can put in virtually any smart card at any time and enjoy all the channels in both HD and SD easily and smoothly. A single box for both of your cards that is!
The receiver also has two CA module slots for additional expansion of slots.



FEATURES DRAFT

• "Blind Search" "Auto Search" "Manual Search" "Advanced Search" transponders
• Maximum simplicity of the user menu
• Excellent matrix LED on the front panel (VFD)
• Support for up to five physical drives (3 x USB and 2 x SATA)
• 2 x CI and 2 x CA interfaces
• Play DivX or MKV  Movies  
• View Images in high resolution up to 1080i
• Advanced Mode "Picture in Picture" HD
• 13 Multi Pictures
• Single Component Output 3 x RCA
• The presence of two independent DVB-S2 Tuner
• Powerful decoder STi7105 for MPEG4/MPEG2, HD / SD
• Simultaneous recording of three channels as HDTV
• Time-Shift mode, activated automatically or Manually
• Stable operation of all functions of PVR
• Convenient music player, MP3
• Universal Remote Control
• Standby mode with the consumption of 1W



FAQ (Frequently Asked Questions)

Question:
Can i Record channel From Different satellites at same time ?

Answer:
Yes you can record Channel from Different Satellite by using 2 Tuners for Example you Connect "Sat A" to "Tuner 1" & "Sat B" to "Tuner 2" now you can Record Channel of "Sat A" and Record or Watch "Sat B" channel  as well !!! if you want full channels of 1 Satellite without the restriction of Horizontal & Vertical you can Connect Twin output LNB and Make 2 Cable to 2 Tuners now you have Full channel Horizontal and Vertical for Recording or Watching PIP (Picture in Picture)



Question:
Can i Watch the Recorded Channel in My Computer and make DVD or Transfer to my Mobile ?

Answer
Yes you can Watch the Recorded TS file in your Computer but you must Install Codec in your Computer i recommend K-Lite Codec pack, if your Mobile Support TS file then you can simply transfer the Recorded file and play but if your Mobile Doesn't Support then you have to Convert the video to your Mobile Compatible Format, You can Use any DVD maker Software to Make DVD from Recorded TS file and Play in your DVD player,




Question
Can i Use Software of XDSR400 in XDSR600 or Vise Versa ??

Answer
No you cannot Use Software !!! but you can Use plugin of XDSR400 in XDSR600 or Vise versa



Question
Can i Continue recording or Time-shift Channel While im Watching Youtube Video or Browsing Internet ?

Answer
Yes You can Continue recording or Time-Shift Channels while you are watching YouTube Videos but you cannot Continue Recording or Time-shift while Browsing Internet


Question
What are the accessory's with XDSR600 ?

Answer
Accessory's are

HDMI Cable
Universal Remote Control (Refer to User manual Page 64 to 71 for Supported Bra$$$)
DVB-T Tuner
SATA Cable for Internal Hard-Disk
Loop-Through Cable
Power Cord
Tuner Cover (If you Remove Tuner you can Cover the hole with this plate)
Battery for Remote
&
English User Manual



Question
can i use all 2 cards and 2 cam at same time ?

Answer
yes you can use all the 4 card slots for your subscribed channels at same time


Question
What type of keyboard and Mouse i can Use to Browse Internet ?

Answer
You can use any Keyboard and any Mouse but it must be USB type, Just Plug and Play


Question
Can i Install Other Images Like Enigma2 Neutrino Etc...



Answer
Yes this model is Compatible with ENIGMA2 and NEUTRINO etc and you can install all the Image based on SH40 Core CPU


Question
What type of Emulators it can Support

Answer
You can Use CCCAM NEWCAMD CAMD35 And you can Connect Sat Share Donlges Like Microbox DarkII Y4 Y6 Timer Etc....


Question
Can i make Card Sharing ?

Answer
Yes you can Share your  Valid Subscribed Card with your Local XDSR600 up-to 20 users  Wired or Wireless


Question
This Box can Run Original bin CCCAM or OSCAM ?

Answer
This Box can Run all type of Bin file's compiled for SH40 CPU either CCCAM or OSCAM



For More Information on How to use or Screen shot Please Refer to User manual

You are not allowed to view links. Register or Login

Offline msubian73

  • Jr. Member
  • **
  • Posts: 4
xdsr600hd hang
« Reply #1 on: May 13, 2012, 08:49:40 AM »
hi...
i bought new xdsr600hd but the receiver hand due to cccam server setting. how do i overcome the problem?
and i don't know how set c-line account in my xcruiser receiver.
is any other way reset the receiver (hard reset)? i try to reset but i don't enough time to select recovery mode. it hang when i try go to recovery page..so i can't proceed. can anybody help?
hope someone will help me...
thanks

Offline tarey888

  • Jr. Member
  • **
  • Posts: 11
Xcruiser XDSR600HD
« Reply #2 on: May 13, 2012, 09:37:45 AM »
Quote from: msubian73;128025
hi...
i bought new xdsr600hd but the receiver hand due to cccam server setting. how do i overcome the problem?
and i don't know how set c-line account in my xcruiser receiver.
is any other way reset the receiver (hard reset)? i try to reset but i don't enough time to select recovery mode. it hang when i try go to recovery page..so i can't proceed. can anybody help?
hope someone will help me...
thanks


for CCCAM transfer the CCcam.cfg file to receiver Root/Var/Etc
and Start the Xcamclient from plugin menu
to know how to access receiver Root directory follow the PDF guide from You are not allowed to view links. Register or Login

for Hard Reset download the software from You are not allowed to view links. Register or Login and install in your receiver
your receiver will be reset to factory default and then you have to update the software with latest version

Offline msubian73

  • Jr. Member
  • **
  • Posts: 4
Xcruiser XDSR600HD
« Reply #3 on: May 13, 2012, 05:08:42 PM »
Quote from: tarey888;128027
for CCCAM transfer the CCcam.cfg file to receiver Root/Var/Etc
and Start the Xcamclient from plugin menu
to know how to access receiver Root directory follow the PDF guide from You are not allowed to view links. Register or Login

for Hard Reset download the software from You are not allowed to view links. Register or Login and install in your receiver
your receiver will be reset to factory default and then you have to update the software with latest version


thank you so much.very kind of you....

may i know how to do the hard reset?
can you please guide me.
thanks

Offline labud

  • Administrator
  • Hero Member
  • *****
  • Posts: 9026
Xcruiser XDSR600HD
« Reply #4 on: May 13, 2012, 08:41:11 PM »
hard reset mean  from behind the button turn off /on
-----------------------------------------------








UNAUTHORIZED DECODING OF ENCRYPTED SIGNALS FROM EITHER DOMESTIC OR FOREIGN PROVIDERS IS AGAINST THE LAW !!!
INFORMATION CONTAINED IN MY POSTS ["C/P FROM ANOTHER SITE"] ARE FOR LEARNING AND EDUCATIONAL PURPOSES ONLY !!!
PLEASE, DO NOT SEND ME PRIVATE MESSAGES WITH TECHNICAL QUESTIONS, USE FORUM FOR IT !!!

Offline msubian73

  • Jr. Member
  • **
  • Posts: 4
plugin
« Reply #5 on: May 14, 2012, 04:11:36 AM »
hi..
where do get latest plugin for my receiver (xdsr600hd.

someone can guide me how to setup cccam account in this receiver.
currently i am using open box receiver to receive thaicom5,astro,nss6  and st1.

how do i can transfer my c-line account in to xdsr receiver?

thanks

Offline labud

  • Administrator
  • Hero Member
  • *****
  • Posts: 9026
Xcruiser XDSR600HD
« Reply #6 on: May 14, 2012, 05:20:25 AM »
Read post three (3)
-----------------------------------------------








UNAUTHORIZED DECODING OF ENCRYPTED SIGNALS FROM EITHER DOMESTIC OR FOREIGN PROVIDERS IS AGAINST THE LAW !!!
INFORMATION CONTAINED IN MY POSTS ["C/P FROM ANOTHER SITE"] ARE FOR LEARNING AND EDUCATIONAL PURPOSES ONLY !!!
PLEASE, DO NOT SEND ME PRIVATE MESSAGES WITH TECHNICAL QUESTIONS, USE FORUM FOR IT !!!

Offline msubian73

  • Jr. Member
  • **
  • Posts: 4
cccam
« Reply #7 on: May 14, 2012, 06:04:25 AM »
Quote from: labud;128085
Read post three (3)


i tried with that but unsuccesful. the cccam.cfg copied to the etc folder in the receiver but is not working.
is there other method?